THINKCAR Thinkscan Plus S7 7 System Diagnostic+ 5 Reset Service+WiFi Lifetime Free Update+2 Years Warranty

Good News: work for Brazil for GM, for Fiat now!

Are you troubled by the renewal of model software and functions?

ThinkScan Plus S7 Support to multi Systems(ECM/TCM/ABS/SRS/BCM/AC/IC) and you could choose 5 Reset services lifetime to use.

1. Support to diagnostic ECM/TCM/ABS/SRS/BCM/AC/IC system errors, erase the errors, data stream, turn off the MIL and vehicle info.
2. Supports to do Full obd 2 function,including Read/Clear codes,data stream,I/M readiness,O2 sensor,DTC look up and more....
3. ThinkScan Plus S7 can do 5 reset revices functions which choose from 28 Special Functions.
4. One-Click lifetime update software.
5. Support Multiple Languages：English, Russian, Spanish, Portuguese, French, Japanese, German,Italian,Polish,Turkish
6. Support More than 120+ Car Models
7. Easy to operate and easy to carry
8. 5-Inch/TFT(IPS) Touch Screen
9. ScreenShot & Screen Recorder, QR to Share & Print Diagnostic Report
10. Type-C Data Cable to Export the Data, like pictures, videos, reports and etc.
11. One-Click Hot Key Battery Voltage Monitoring: You can click the "Notification Bar" or called "Drop-Down Bar" to get the battery stream, the Voltage Amount shows on the "Notification Bar" or called "Drop-Down Bar" too.

28 maintenance Service for You Choice!

there are 28 reset service on every device, please make sure what 5 reset service you want, if you need more, you can purchase it.

NOTE: Can only choose 5 reset service free !!!

1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Key Programming
The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

12.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

13.AFS Headlamp Reset

AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

14.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

15.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

16.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

17.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.Cluster Reset

a) Cluster reset is to use the car diagnostic computer and data cable to restore the kilometer value in the odometer chip to make the odometer display the actual mileage.

b) Usually when the mileage is incorrect due to damage to the vehicle speed sensor or malfunction of the odometer,

Cluster reset is required after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

Note:

These special function NOT for all car models, if you are confused, you can send your car brand, model and release year to me, I will check for you.

Please Leave us message in below format, we will reply you within 8 hours. For example : xx, 2005, 2.0cc, Diesel

Thinkscan plus s7 support full universal OBDII 10 modules function

Reading Codes; Reseting Codes; Live Data Stream; Live Data Stream; I/M Readiness; Freeze Frame; On-Board Monitor Test; Read Vehicle Information; Read Vehicle Information; Component Test

Livd Data

The ThinkScan code readers & scan tools will see essential information about your vehicle in real-time to aid in diagnosisin text and graph them. Just select the factor you want to display, and then click "graph". The targeted factors will be shown in single graph/ multi-gragh and you can merge four graphs together.