Good News:

work for Brazil GM, Fiat now!

Note：

Brazil warehouse has inventory, if you need your package to be shipped from Brazil warehouse, please contact me.

THINKCAR Thinkscan Plus S7 7 System Diagnostic+ 5 Reset Service+WiFi Free Update

Thinkscan Plus S7 products are a new generation of mid-to-high end DIY products based on Android system launched by THINKCAR, which can realize online upgrade of diagnostic software. Its main functions include not only OBD/EOBD standard protocol diagnosis, but more importantly, it has professional vehicle diagnostic software and maintenance software, which can perform a comprehensive diagnosis of all vehicle electronic control systems. Different series support different systems and functions.

You only need to spend less than $200 to have professional high-end products with DIY unique designs.

ThinkScan Plus S7 Support to multi Systems(ECM/TCM/ABS/SRS/BCM/AC/IC) and you could choose 5 Reset services lifetime to use.

1. Support to diagnostic ECM/TCM/ABS/SRS/BCM/AC/IC system errors, erase the errors, data stream, turn off the MIL and vehicle info.
2. Supports to do Full obd 2 function,including Read/Clear codes,data stream,I/M readiness,O2 sensor,DTC look up and more....
3. ThinkScan Plus S7 can do 5 reset revices functions which choose from 28 Special Functions.
4. One-Click lifetime update software.
5. Support Multiple Languages：English, Russian, Spanish, Portuguese, French, Japanese, German,Italian,Polish,Turkish
6. Support More than 120+ Car Models
7. Easy to operate and easy to carry
8. 5-Inch/TFT(IPS) Touch Screen
9. ScreenShot & Screen Recorder, QR to Share & Print Diagnostic Report
10. Type-C Data Cable to Export the Data, like pictures, videos, reports and etc.
11. One-Click Hot Key Battery Voltage Monitoring: You can click the "Notification Bar" or called "Drop-Down Bar" to get the battery stream, the Voltage Amount shows on the "Notification Bar" or called "Drop-Down Bar" too.

ThinkCar ThinkScan Plus S7 System Diagnostic Scanner For ABS SRS ECM TCM BCM IC AC

1. Chassis System(BCM) Diagnostic: Carry out fault diagnosis on body/frame/transmission system/steering system/brake system/driving system
2. ABS System Diagnostic: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
3. Engine System Diagnostic: You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.
4. Auto Transmission System: AT is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. ThinkScan Plus S7 obd2 scanner can read/clear codes and view live data retrieve the error information from AT.
5. AC System Diagnostic
6. IC System Diagnostic
7. SRS System Diagnostic: Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.

What is "Maintenance" Reset Service Mode?

The functions are more advanced than code reading,It can be activated, or re-write, reset data into ECU, calibration, adaptation, or match. Kind of helping you fix car problems.

THINKSCAN Plus S7 offers 5 reset services from 28 reset functions

*Provide THREE Advanced Maintenance Service Mode Reset Function lifetime free.
*And the company provides 28 Maintenance Service Reset Reserved functions for users to buy when need.
*Though each Reset functions worths hundreds of pounds, you can access to one reset by subscribing at USD $29.95, and can use for 12 months.

The THINKCAR Thinkscan Plus S4 supports 28 commonly used special reset functions, allowing you to quickly access the vehicle system for various scheduled services, maintenance and reset performance, eliminating the need to reset the car after solving common problems Troubles.Listed some commonly used special reset services for your reference:

1.Oil Lamp Reset Service

To reset your oil service after changing the oil or simply resetting your vehicle inspection warning light(please make sure your vehicle is in good condition). The scanner helps you to reset the service lamps on the instrument cluster.

2.EPB Electronic Park Brake Reset

It is a technology that realizes parking brakes by electronic control. This OBD2 scanner is an essential tool required to release the rear electric parking brake unit when replacing rear pads or discs so that the caliper piston can be moved back. It can also clear codes and turn off the EPB light when it’s done.

3.BAT battery service

Evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. Not all vehicles need to do the battery reset after changing batteries.

4.DPF Diesel Particulate Filter Reset

it is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance.
DPF regeneration may be performed in the following cases:
a)The exhaust back pressure sensor is replaced.
b)The PM trap is removed or replaced
c)The fuel additive nozzle is removed or replaced
d)The cataytic oxidizer is removed or replaced.
e)The DPF regeneration MIL is on and maintenance is performed.
f)The DPF regeneration control module is replaced.

5.SAS Steering Angel Sensor Reset

To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor ,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.

6.TPMS Tire Pressure Monitoring System Reset

This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS replacement and sensor test.
1. After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL warning light.
2. Tire pressure resetting must be performed after maintenance performed in the following situations:
tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, or tire is replaced for the car with tire pressure monitoring function..

7.IMMO Key Programming

The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding

When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.When the vehicle collides and the airbag deploys,the corresponding fault code of the colision data appears,the airbag indicator lights up,and the fault code can't be cleared.Since the data inside the airbag computor is disposable,it is required that all new accessories must be ewplaced,but after performing this function,the data of the airbag computer can be recovered and the fault code can be cleared,the airbag light will go out,and the airbag computer can continue to use.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.Cluster Reset

a) Cluster reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do cluster reset after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

10 Full OBDII Functions

Reading Codes

Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset

Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream

Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream

Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data

Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test

Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test

Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information

Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test

Certain vehicle components can be actuated by commands sent from the scanner to test their operability

Characteristic Function

1.【Scan QR Code to Share&Print + AUTO-VIN】
Unlike most OBDII products on the market, ThinkScan Plus S7 can scan the QR code and share it where you want to share and print it after obtaining the diagnostic report. You can also take out the SD card and export diagnostic report; Convenient and fast, keeping up with the trend of the times. And you can also Auto-VIN your vehicles at anytime, Automotive VIN identification help you to read and store your car's VIN number by one click conveniently and effectively, no need you to input the VIN one by one to save your time.manual diagnosis is also available.

2.【ScreenShot + Screen Recorder + WIFI Update】: We also have two excellent advantages, that is, when you enable the screenshot and screen recording functions in the settings, you can start to take screenshots and screen recordings, they will finally be saved in "Photo album" and "Screen recorder" Under the " Settings". Besides, you can update software free lifetime.

3.【Dashboard Display + Auto-Test Battery Voltage】: After the car is ignited, once connected to the car DLC, the main interface of ThinkScan Plus S7 will have a small dashboard indicator to indicate that the connection is successful; and once connected, the OBDII Scanner will automatically diagnose the battery voltage

4.【Live Data On Graph】2-in-1 live data from car code reader can be show in graph to make the data in your car system based on visualization, which helping you to analyze the abnormal parameter and help your problem more easy.

Intellignt Scanner

1. ThinkFile
It stored the diagnostic result of each vehicle scanned, you can check later conveniently, and you can see DEMO before diagnostic.

2. Special Function Playback Learning
Special functions are so complex that even experienced mechanic may get confused, with this special function playback learning get job done easily.

3. Feedback Function
Tell engineer a bug or error to get quick solution.

Thinkcar Thinkscan plus S7 diagnostic Scanner support 12 languages

English, Russian, Spanish, Portuguese, French, Japanese,German,Italian,Turkish,Polish,Dutch,Swedish

Steps:
go to “Setting” module -> select the language you need -> go to “Upgrade” module -> download & install the car software pack translated in selected language.

Support more than 140+ Car Brands:

Diagnostic cover all vehicles that support the OBD protocol after 1996.

For Amercian
for Buick, for Chrysler, for Cadillac, for Chevrolet, for Doge, for AU Ford, for Brazil Fiat, for Brazil GM, for Ford, for GM, for Jeep, for Lincoln, for SGM

For European
for Aston Martin, for Audi, for Alfa Remeo, for Abarth, for BMW, for Bentley, for Bugatti, for Citroen, for DR, for Dacia, for EU Ford, for Ferrari, for Fiat, for GAZ, for Iveco, for IZH, for Jaguar, for Land Rover, for Lamborghini, for Lancia, for Mercedes, for Maserati, for Maybach, for Mini, for Opel, for Opel (south africa), for PAZ, for Peugeot, for Porche, for Renault, for Rover, for Rolls-royce, for SAAB, for Seat, for Skoda, for Smart, for Sprinter, for UAZ, for VAZ, for Volvo, for Volkswagen, for Vauxhall, for ZAZ

For Asian
Acura, for Daewoo, for Daihatsu, for AU Holden, for Honda, for Hyundai, for Ikco, for Isuzu, for Infiniti, for Kia, for Luxgen, for Lexus, for Mahindra (India), for Maruti (India), for Tata (India), for Mahindra, for Maruti, for Mazda, for Mitsubishi, for MVM, for Nissan, for Nissangtr, for Perodua (Malaysia), for Proton (Malaysia), for Perodua, for Proton, for Renault Samsung, for Saipa, for Ssangyong, for Subaru, for Suzuki, for Toyota, for Tlisuzu, for United Pakistan

Note:

Please Kindly Note: Each car supports different reset functions. If can't sure, please offer your car model and manufacture year to contact the SELLER
we'll provide one-to-one online technical support and customer service.

Support car list query:

https://h5.thinkcar.com/coverage/all

Product Configuration and Detail

【Plug and Play + Big Holder + 5'' TouchScreen】: Memory: 1G, Storage Capacity: 16G, Battery: 800mAh/3.7V, OBD2 Cable: Integrated Undetachable Design. No worry of cable missing. Holder: Big Anti-slip design. Plug in and play, easy to carry. Sensitive 5'' large screen with Android 7.0, you can display the interface you want with a flick of your finger, come and go freely.