Style 2, 3000A Car Jump Starter 4 In1 Pump Air Compressor 150PSI 3000A Car Starting Device Power Bank Starter Booster Digital Tire Inflator
Guarantee Safe Checkout
Compare color
With bag
With box
Ask a question
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Style 2, 3000A Car Jump Starter 4 In1 Pump Air Compressor 150PSI 3000A Car Starting Device Power Bank Starter Booster Digital Tire Inflator
SPECIFICATIONS
Brand Name: NarzrIe
Origin: Mainland China
Hign-concerned Chemical: None
Battery Capacity(mAh): 20000-30000
Peak Current: >1200 A
Conversion Rate: >90%
Number Of Built-in Batteries: 4
External Testing Certification: ce
External Testing Certification: CCC
Voltage: 12V
Why it's necessary to get a jump starter?
1. Long standby time run out battery;
2. Make preparation for a long driving trip;
3. Your car can't start due to low power or freezing winter;
We help you !! Car Jump Starter !
1. Jump Start (2000A-3000A)
2.Battery Capacity :29600mAh
3.Power Bank ( fast charging )
4.LED Light (SOS/Lighting/Strobe)
5. Work Light indicator
6. Car Jump Start Output :12V
Precautions before using the emergency power supply [nail] can be written on the product details page:
1. The product has just been received. Please turn on the flashlight to discharge it first, then charge the product for more than 4 hours before starting the car, because the product contains virtual electricity. This operation can extend the service life of the product!
2. It is recommended to start the car with the power supply at three levels or above 60%
3. Check whether the battery pile head is clean
4. Start the car with ordinary clip: Check whether the blue port of the clip is inserted all the way, whether the clip contacts the positive and negative terminals of the battery with the largest area, and whether the clamp is stable and does not shake. First, clamp the positive and negative terminals of the clip to the positive and negative terminals of the battery respectively. and wait 2 to 3 minutes before starting the car. This can reduce the load on the power supply.
Tips before use
1. Do not ignite the car continuously/or hold the key while turning it. Wait 30 seconds between each start before starting the next time.
2. The positive and negative poles cannot be connected reversely. The two clips cannot be short-circuited.
3.Remove the clip within 30 seconds after successfully starting the car.
Failure to comply with the above three points may cause the clip's [fuse box] to burn out. Please be sure to pay attention to the operation method.
1. Long standby time run out battery;
2. Make preparation for a long driving trip;
3. Your car can't start due to low power or freezing winter;
We help you !! Car Jump Starter !
1. Jump Start (2000A-3000A)
2.Battery Capacity :29600mAh
3.Power Bank ( fast charging )
4.LED Light (SOS/Lighting/Strobe)
5. Work Light indicator
6. Car Jump Start Output :12V
Precautions before using the emergency power supply [nail] can be written on the product details page:
1. The product has just been received. Please turn on the flashlight to discharge it first, then charge the product for more than 4 hours before starting the car, because the product contains virtual electricity. This operation can extend the service life of the product!
2. It is recommended to start the car with the power supply at three levels or above 60%
3. Check whether the battery pile head is clean
4. Start the car with ordinary clip: Check whether the blue port of the clip is inserted all the way, whether the clip contacts the positive and negative terminals of the battery with the largest area, and whether the clamp is stable and does not shake. First, clamp the positive and negative terminals of the clip to the positive and negative terminals of the battery respectively. and wait 2 to 3 minutes before starting the car. This can reduce the load on the power supply.
Tips before use
1. Do not ignite the car continuously/or hold the key while turning it. Wait 30 seconds between each start before starting the next time.
2. The positive and negative poles cannot be connected reversely. The two clips cannot be short-circuited.
3.Remove the clip within 30 seconds after successfully starting the car.
Failure to comply with the above three points may cause the clip's [fuse box] to burn out. Please be sure to pay attention to the operation method.
| Color |
With bag, With box |
|---|---|
| Ships From |
United States |
