modname=ckeditor

Bullet Points:

1,2-in-1 Practical Design: The Car Cup Holder Expander utilizes a 2-in-1 design, making it possible for you to place a mobile phone and a cup/cup with a handle at the same time.

2,Non-slip and Firm Fixation: The Automotive Cup Holder has 4 elastic silicone sheets, and is able to hold most sizes of cups/bottles, making the cups not shake when driving on bumpy roads.

3,Wide Compatibility: The size of the bottom fixing device can be adjusted to an outer diameter of about 100mm/3.94inch, making it suitable for vehicles with larger original cup holders.

4,Wide Application: The Cup Holder Expander for Car can adapt to thermos cups, beverage bottles, milk tea cups, coffee cups, p op cans, car ashtrays, etc.

5,More Storage Options: The Car Cup Holder Expander can hold water cups with a diameter of less than 108mm/4.25inch and a mobile phone with a width of less than 97mm/3.82inch, and a mobile phone charging port is reserved.

Description:

The Cup Holder Expander for Car can adapt to cups/bottles with a diameter of less than 108mm/4.25inch, such as thermos cups, beverage bottles, milk tea cups, coffee cups, p op cans, car ashtrays, etc., and is able to hold a cell phone with a width of less than 97mm/3.82inch.

Installation Notes:

1. Install in the original car cup holder.

2. Find a suitable cup holder, then adjust the base to a suitable position, put it into the original car cup holder, and then turn the cup holder to p op out the fixed key in the base until it is fixed.

3. If the original position of the cup holder is not suitable for installation, you can unscrew the screw in the cup holder, then adjust the screw hole position of the cup holder to the front, back or left and right, and then screw on the screw.

4. Do not install in a position that affects driving.

5. After drinking the water, tighten the bottle cap to prevent the liquid from shaking out.

Specifications:

Product Name: 2-in-1 Car Cup Holder Expander

Product Color: Black

Product size: about 155*121*161mm / 6.1*4.7*6.3 in

Material: ABS, silicone

Weight: about 337g

Applicable models:

The cup holder is suitable for the size that is less than 108mm/4.25inch,

the mobile phone holder suits a cellphone with a width below 97mm/3.82inch, and the thickness below 24mm/0.94inch.

Packing List:

1* Multi-Purpose Automotive Cup Holder Expander

Notes:

1. Due to the lighting effects and shooting angles, there is a color difference in the product, please understand.

2. Due to manual measurement, there is a tolerance in the product size.